Rally Model Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Removing a sunstar subaru body

3 posters

Go down

Removing a sunstar subaru body  Empty Removing a sunstar subaru body

Post  Gav_rs1800 Wed Apr 10, 2024 7:54 pm

Hi everyone,

Can anyone help me on how to remove a sunstar 1/18 subaru body form the base, all i see is 2 screws in d middle of it and when removed it wont seperate?


Also where can I get a RHD for the colin mcrae san remro subaru

Thanks in advance

Gav_rs1800

Posts : 18
Join date : 2024-01-26

Back to top Go down

Removing a sunstar subaru body  Empty Re: Removing a sunstar subaru body

Post  bmd Thu Apr 11, 2024 7:29 am

Gav. if i rem correctly the two centre screws only hold the inner tub section to the base, have a look up under each wheel and see if there four srews there....
billy
bmd
bmd

Posts : 7002
Join date : 2012-02-12
Age : 57
Location : here

Gav_rs1800 likes this post

Back to top Go down

Removing a sunstar subaru body  Empty Re: Removing a sunstar subaru body

Post  RORY O CONNOR Fri Apr 12, 2024 1:49 pm

There are six screws. 4 are easy to get too. Two under the front wheels, two at the B pillar but there are two under the rear wheels which are tricky to get to, so you'll need a thin screwdriver. When all are out open the rear doors and push the tub out. Front and rear windows are tricky to remove without breaking. If stripping the paint, the door handles are plastic and the vents on the bonnet. The door bandles can be removed by pushing a thin pointed screw driver or mathematical compass from behind the door.
RORY O CONNOR
RORY O CONNOR

Posts : 1655
Join date : 2012-02-08

Back to top Go down

Removing a sunstar subaru body  Empty Re: Removing a sunstar subaru body

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum